Part A | ||
Water | 500 | ml |
Thiourea | 15 | g |
Sodium Thiosulphate (Hypo) | 700 | g |
Water to make | 1000 | ml |
Part B | ||
Water | 200 | ml |
Potassium Ferricyanide | 75 | g |
Water to make | 250 | ml |
Mixing Instructions: Add chemicals in specified sequence. |
Dilution: Add 5 parts of Part A to 14 parts Water then mix A and B in equal quantities. |
Usage: |
Notes You can slow the effect down by diluting this solution 50/50 with additional water. This reducer is highly recommended if you are using Farmers bleach on prints and wish to switch to something just as versatile but without the stain that Farmer's produces at strong dilutions. |