Help

Film Photography & Darkroom discussion

Moderator: Keith Tapscott.

Post Reply
T. K. Taylor
Posts: 1
Joined: Mon Aug 23, 2004 1:21 pm

Help

Post by T. K. Taylor »

I am a beginning photographer and need help. I pushed Ilford 125 FP5+ to 1600. Can anyone tell me either a developer that will work and if possible, point me towards a chart or give me a time and dilution for using HC-110 developer?

Thank you

Digitaltruth
Site Admin
Posts: 309
Joined: Mon Aug 16, 2004 8:24 pm
Contact:

Post by Digitaltruth »

If you go to our main page at http://www.digitaltruth.com and follow the link to the Massive Dev Chart, you will find a push processing chart listed in the menu on the left-hand side.

You will get some negatives from this roll, but pushing a medium speed film this far will not produce a great result.
Digitaltruth Photo
https://www.digitaltruth.com

Lowell Huff
Posts: 129
Joined: Thu Aug 19, 2004 6:09 pm
Location: Los Angeles, CA 90061
Contact:

Post by Lowell Huff »

In my opinion, HC110 Developer, is too high in contrast to do a good job of pushing that film that far.
I recommend Clayton F 76plus to do that job. I can give you the times and temps if you contact me. askus@claytonchem.com

Post Reply